How To Make Pine Resin Glue

The Pine Tree is an amazingly useful tree to any bushcrafter or survivalist.  First of all, the entire tree is edible…the bark, the needles, the pine cones, etc…  The roots can be used as cordage.  You can make pine needle tea which is rich in vitamins.  You can also use the limbs as building materials and the pine boughs as bedding.  Pine sap also makes excellent fuel for camp lamps and fire starting.  The subject of this post, however, is  how to use PINE SAP to make an all natural and very durable glue.

Pine resin glue can be used for all kinds of applications – at home or in the wild.  I’ve used Pine Resin Glue to make fish-hooks, frog gigs and all kinds of other useful tools.  I’ve also used Pine Resin Glue at home for every day projects.  In this post, we will use Pine Resin Glue to secure Ferrocerium Rod Fire Steel Blanks inside of pre-drilled deer antler handles.

Pine resin can be found on almost EVERY pine tree.  You can typically find it where the pine tree has been wounded by either insects or a broken limb.  The sap will seep from the wound.  You can sometimes find it dried in clumps and nodules all around the tree.

pine-sap-300x293

 

 

 

 

 

 

 

 

Pine Sap Leaking From Wound On Pine Tree

The only other ingredient besides the Pine Sap that you need to make Pine Resin Glue is charcoal.  Just plain old charcoal right out of a campfire will work just fine.  Below is a photo if some pine resin nodules I collected along with a small amount of charcoal from a camp fire.

charcoal-and-pine-sap-300x293

Charcoal Chunks & Dried Pine Resin Pieces

The first step to making Pine Sap Glue is to melt down the pine sap.  I placed the sap clusters in an Altoids Candy Tin and put it on my hot fireplace.

melt-pine-resin-293x300

Melting Pine Resin Clusters on Fireplace

While the pine resin is melting down, crush up your charcoal pieces into a fine powder.  I am simply using a stick.  You could easily do this in the bush on a flat rock or on a piece of bark.

crush-charcoal-300x294

Crush Charcoal Into Fine Powder

The formula I’ve always used for making this glue is 1 part charcoal to 3 parts pine resin.  You will have to experiment with what works best for you. Too much charcoal and your glue will be brittle, too little charcoal and your glue will not be durable enough.  After the pine sap has melted down, mix in the crushed charcoal.

mix-in-charcoal-300x290

Mix Crushed Charcoal Into Melted Pine Sap

As your sap cools, it will harden.  Thoroughly stir in the charcoal before it cools too much.

stir-up-300x296

Mix In Charcoal Really Well Before The Melted Sap Cools

Your glue is complete and ready to use.  Once the glue has cooled, you will need to heat it back up in order to use it again.  At this point, you have a few options.  You can leave the glue in the tin or whatever container you mixed it in.  Or, as the sap cools, you can form it on the stick – which is the way I like to keep Pine Resin Glue

on-stick-300x291

Pine Resin Glue Hardened on Stick

To use the glue simply heat it up over a flame and apply it to whatever you need.  In this case, I am putting some on the end of the Ferro rods that I will be inserting into the pre-drilled deer antlers.

carve-away-excess-291x300

Carving Away Excess Pine Sap Glue

After carving away the excess glue, these Ferro Rods are ready to use in the field and will provide years of excellent service.  I love the idea of making and using Pine Sap Glue from scratch with all natural materials and then using it to build a tool that I will take out with me in the woods and use over and over and over again.  It just doesn’t get any better than that.

3-finished-ferro-rods-296x300

3 Completed Ferro Rods With Mora 840 MG and a “Glue Stick”

finished-ferro-rod-on-fur-291x300

If you have any questions or comments, feel free to leave them below.  I’ve also posted a video below of the entire process from harvesting the sap to building the ferro rods.  Enjoy!

Cheers-

Creek

 

BioPrepper

Source: willowhavenoutdoor.com

About Willow Haven Outdoor & Creek Stewart
Creek Stewart is the Owner and Lead Instructor at Willow Haven Outdoor – a leading Survival and Preparedness Training Facility located on 21-acres in Central Indiana.  For more information on Survival Courses and Clinics offered at WHO, click HERE.  Creek is also author of Build the Perfect Bug Out Bag: Your 72-Hour Disaster Survival Kit and The Unofficial Hunger Games Wilderness Survival Guide.  You can contact Creek directly at [email protected].

One Reply to “How To Make Pine Resin Glue”

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.